careers

Explore Current Job Openings at Our Organization

J2B Industrial is an Equal Opportunity Employer. We do not discriminate on the basis of color, race, religion, sex, national origin, age, marital status, disability, or any other status protected by law. We are a Drug-Free Workplace

Benefits

At J2B Industrial, we offer a variety of health insurance plan options from which our employees select based on their own personal needs.

  • Medical Health Insurance

  • Dental Insurance

  • Vision Insurance

  • Life Insurance

  • Long-term Disability Insurance

  • 401(k) Retirement Savings Plan

  • Vacation and Holidays

  • Sick Leave

We have positions available (Welders, Fitters) so that anyone can go on our website and fill out an application. Attached are 2 photographs they can click on

HERE ARE THE 2 POSITIONS WE NEED TO ADD TO OUR SITE:

Welders – Jacksonville, FL

Job Summary:

Perform many different types of welding and cutting using gas and electric welding equipment to fabricate steel with minimum supervision.

Essential Job Functions:

  1. Perform FCAW and SMAW welding, and be able to pass the 4G test on a 3/8” coupon.
  2. Operate and effectively utilize plasmas and acetylene torches to remove steel
  3. Effectively utilize angle grinder/cutting wheel
  4. Read weld symbols and check weld size using weld fillet gauges and implement proper weld procedures
  5. Set machines and gas flow rates according to procedure charts
  6. Operate stud welder.
  7. Follow weld procedures as it applies to volts, amps & wirefeed speed.
  8. Heat, straighten and be able to know when to use pre-heat to offset distortion.
  9. Perform other duties as required by management while following J2B Industrial’s QMS (Quality Management System)

Qualifications and Requirements:
Required: Must be able to lift a minimum of 50 lbs over shoulder height. Be able to read blueprints. FCAW (2G) SMAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux-cored welding of carbon steel) and WP3 (Flux-cored arc welding with gas shielding of carbon steel).

Preferred: Two or more years of experience in manufacturing in the steel fabrication industry.

Proficiency and use of Software, equipment, machines, tools, and electronic device necessary for the job:

Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Fitters – Jacksonville, FL

Job Summary:

Fabrication of steel parts reading blueprints and building to specifications using hand-held power tools and cutting apparatus with minimum supervision.

Essential Job Functions:

  1. Lay out rises, slopes, and bevels using framing squares.
  2. Pass tack weld test in 3F and 4F positions with F4 electrode group.
  3. Interpret structural steel shop drawings and weld symbols
  4. Be able to camber.
  5. Operate a 90° angle grinder.
  6. Operate the cutting torch.
  7. Fit, Fab structural steel
  8. Operate plasmas and track torches.
  9. Be a qualified welder
  10. Perform other duties as required by management and follow J2B Industrial’s QMS (Quality Management System).

Qualifications and Requirements:
Required: Basic knowledge of ASIC code of standard practices and AWS D1.1. Ability to read a tape measure to 1/16” increments and add/subtract dimensions. Ability to read weld symbols and effectively utilize tools utilized in the fitting process. Must be able to lift a minimum of 50 lbs.

Preferred: Two or more years of experience in manufacturing in the steel fabrication industry.

Proficiency and use of Software, equipment, machines, tools, and electronic device necessary for the job:

Squares (combination, bevel, frame), 90° angle grinder, crane, torch, impact wrench, track torch, reamers, and magnetic drills.